MicroTronik AutoHex Forum Experiance The New Generation of Diagnostic Scan Tools
Welcome Guest Search | Active Topics | Log In | Register

Tag as favorite
Mercedes Benz Automatic transmission problem
drheart Offline
#1 Posted : Wednesday, May 12, 2010 2:14:41 PM

Rank: Newbie

Medals:

Groups: Registered
Posts: 0

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
its a 2000 model E420 MB,the scan toool gives these codes after testing EGS ECU :
024 CAN: ACCLR PEDAL VALUE OR FRONT RIGHT RPM SIGNAL
055 GEAR COMP. NEGATIVE OR SELECTED GEAR NOT REACHED
119 CAN: REAR LEFT RPM SIGNAL FROM THE TRACTION SYSTEM NOT PLAUSIBLE
120 CAN: ACCLE PEDAL VALUE / FRONT RIGHT RPM SIGNAL

but INCOMPLETE GEAR RATIO code was stored on the engine section ECU.

please help
DiagPro Offline
#2 Posted : Friday, May 14, 2010 9:24:25 PM

Rank: Newbie

Medals:

Groups: Registered
Posts: 2

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
i see you have three of four erros related to can bus network
i think in such case this car has something confusing the can bus, you must check the can bus network espcially the wires
if everything is fine, use your scanner and test the EZS (for newer cars you must test the CGW) sometimes it can be the reason
techscan Offline
#3 Posted : Saturday, May 15, 2010 12:28:26 PM

Rank: Newbie

Medals:

Groups: Registered
Posts: 0
Location: uk

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
for the EGS error code 055 you have to check ATF oil level harness , ATF oil filter is not installed , Shift pressure regulating soleniod valve ( Y3/6y2) and Shift control valve .
hope that will help
Users browsing this topic
Guest
Tag as favorite
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Diagnostic Scanners Scan Tools Mercedes Benz scan tool BMW scan tool Toyota Lexus scan tool VW Audi scan tool